Florian Müllner [Thu, 24 Jan 2013 11:14:19 +0000 (12:14 +0100)]
workspacesView: Always zoom out switcher when using static workspaces
We always leave the workspace switcher zoomed out when we can assume
that the user is actually making use of workspaces. For the default
dynamic workspace behavior, we make this assumption when more than
two workspaces are in use (e.g. at least two workspaces contain windows
plus an empty one at the end). However this test does not make sense
when using static workspaces - in that case, not using workspaces
would be indicated by a workspace number of 1 (in which case the
entire switcher is hidden completely), so add a check for dynamic
workspaces to the condition.
Currently both the app switcher and the thumbnail list divide items
first into two groups (based on whether the item is located on the
current workspace or not), and then sort each group individually
by MRU.
The resulting behavior is often confusing, e.g. when using alt-tab
a second time does not switch back to the original window when the first
invocation involved a workspace switch and the workspace contains
windows of more than one application.
Instead, make the behavior more predictable by sorting both lists
strictly by MRU.
Stef Walter [Wed, 13 Feb 2013 20:57:02 +0000 (21:57 +0100)]
modalDialog: Fix auto-completion of prompts immediately upon display
Shell modal dialogs can take their action on a certain key's
key-release-event. For example on <enter> the affirmative action is
usually run.
Make sure that the key was also pressed on the dialog and we're not
seeing a spurious key-release-event from a key that was pressed before
the dialog was displayed.
It is possible that a session survives after closing, if any processes
(usually PulseAudio and GConf) are still alive at the end. In that case,
ignore it, as the user is already logged out and there is nothing to lose.
Florian Müllner [Sat, 2 Mar 2013 09:48:25 +0000 (10:48 +0100)]
osdWindow: Add a simple OSD popup
Implement a basic OSD popup that shows an icon and optionally a label
and a fill level. It is based on the existing OSD implementation in
gnome-settings-daemon, which it will replace.
Ray Strode [Thu, 21 Feb 2013 19:32:23 +0000 (14:32 -0500)]
main: put noise texture below startup animation, not still frames
Right now we take a still frame of the desktop before showing the
start up animation. This gives us an animation over what was
there before startup.
That's not actually desirable when restarting the shell. We don't
want to animate over undecorated windows, we really want to animate
over the noise texture.
This commit drops the still frames in favor of the noise texture.
Rui Matos [Sat, 2 Mar 2013 15:46:29 +0000 (16:46 +0100)]
css: Make input sources switcher symbol font smaller
Particularly when using asian languages the symbol could become large
enough to not fit in the space we have and we'd end up with a totally
ellipsized item.
Previously, the overview BoxLayout was sized and positioned explicitly
using the primary monitor coordinates, as its parent was at 0,0 and
with a fixed layout manager. Now we use a bin layout, so we need to
position and size the stack actor, and set the overview boxlayout to
expand.
Take also the occasion to use a MonitorConstraint instead of handling
position and size manually.
We used to clip the overview group to prevent the dash from sliding into
neighbor monitors, but now it moved to the groupStack, so we must move
the clip too.
Cosimo Cecchi [Fri, 1 Mar 2013 02:25:05 +0000 (21:25 -0500)]
messageTray: add an indicatorCount property
This filters out resident and transient notifications in the normal
case, but just returns the number of unread messages for the Telepathy
implementation.
Florian Müllner [Thu, 21 Feb 2013 17:48:09 +0000 (18:48 +0100)]
overview: Move dash to a separate layer
We generally want view content centered, in particular where the
view itself is symmetrical. So move the dash to a separate layer
and use a placeholder to account for its size when showing the
window picker, which is the only view where it doesn't make sense
to center the content.
Florian Müllner [Fri, 1 Mar 2013 17:14:33 +0000 (18:14 +0100)]
overview: Use the new main actor in show/hide transitions
Commit 43ed66cf266bbd changed the toplevel overview actor, so it
makes sense to change the show/hide transitions to use that instead
of the existing group, to avoid elements layered on top of the
group being excluded from the transitions.
Layout: don't minimize fullscreen windows that are focused
Windows can sometimes be focused, or appear to be focused, without being
at the exact top of the stack, for example in the case of override-redirect
windows, or with attached modal dialogs. In that case, we should not
try to minimize them (as it creates a loop that makes it impossible to restore
the window)
Ray Strode [Thu, 28 Feb 2013 15:43:39 +0000 (10:43 -0500)]
main: register with session manager explicitly
Mutter now makes session registration an explicit required
step. This is so we can tell the session manager when
we're ready to move on to the next phase.
This commit calls the new Meta.register_with_session() api after we're
initialized.
Florian Müllner [Sat, 23 Feb 2013 00:37:05 +0000 (01:37 +0100)]
scroll-view-fade: Tweak easing at edges
Since commit b4f5f1e46174, the effect is eased in at the scroll
view's edges so that it does not appear out of nowhere. However,
the linear easing used is not the best option, as now the effect
appears so late that content near the edges ends up just being
cut off rather than faded out.
So adjust the easing function to have the effect appear faster.
"description" is documented as a valid field for search result metas,
and ListSearchResults implements it, so pass it down to be used.
Also, don't wrap the description in quotes, so that the search provider
can decide if it is an excerpt from the searched text or something else.
And to that extent, set use_markup to true, so that terms can be
highlighted.
workspace: Fix bad window positions with small windows
This can happen if you open two or three terminal windows, and then
open the overview -- they're not centered. The issue is that because
of the WINDOW_CLONE_MAXIMUM_SCALE clamping, the scale that is being
laid out is different from the scale that the layout was calculated
for.
Implement and document a hack-ish solution which simply keeps the
scale for the layout as originally calculated, but centers the
windows inside the cell.
workspace: Separate out per-window scaling as a separate variable
Multiplication is linear, so we can split this out as a separate
component. This will make it easier to think of it as an additional
per-window scaling factor, rather than tweaking the scale a bit,
which is more correct to the model.
Florian Müllner [Thu, 28 Feb 2013 13:50:56 +0000 (14:50 +0100)]
extensionPrefs: Fix opening extension preferences on startup
gnome-shell-extension-prefs supports opening a specific extension's
preferences directly from the command line by passing the UUID.
However this broke when extension loading was changed to be processed
asynchronously, as no extension has been loaded when the command
line argument is processed. Fix by deferring opening the extension's
preferences until all extensions have been loaded.
Matthias Clasen [Wed, 27 Feb 2013 04:50:29 +0000 (23:50 -0500)]
Show the session list when needed
Some of the conditions for showing the user list were not
properly inverted, causing the session list to be hidden
when it shouldn't be and shown when it shouldn't be.
When pressing against the bottom of the screen, we shouldn't
really take more than 15px from each event, to prevent spruious
mouse movements from opening the barrier.
tweener: Look at the XSetting for disabling animations
gnome-settings-daemon will be changed to override the XSetting in
the case where we're on a remote display rather than overwriting a
user setting, so we need to look at the XSetting here.
ScreenShield: fix positioning of background with multimonitor
Previously, we would create one StBin per monitor, but each was positioned
at 0,0 and sized as the screen, so they would overlap and draw the box shadows
on top of the other backgrounds.
Instead, we need to size appropriately the bin, and then we need to position
the actual MetaBacgroundActor at 0,0, so add a flag to BackgroundManager
for this.
Also, get rid of MetaBackgroundGroup, they do nothing because the screenshield
is not a descendant of the MetaWindowGroup and because the widget in between
blocks the propagation of the visible region. At the same time, use a
widget, not a bin, because StBin requires you to set .child, not call add_child().
Florian Müllner [Fri, 22 Feb 2013 19:56:24 +0000 (20:56 +0100)]
viewSelector: Don't focus search entry on whitespace
We recently started to trim leading and trailing whitespace from
the search string, and not to trigger a search when the resulting
string was empty. However we still allow whitespace to trigger
type-ahead-find, so that the key focus is moved briefly to the
search entry and back to the stage, resulting in a disruptive
flickering of the entry.
Fix this by excluding whitespace from triggering type-ahead-find.
Adel Gadllah [Fri, 22 Feb 2013 18:26:17 +0000 (19:26 +0100)]
xdnd: Don't wait for the stage to be disabled when it is already visible
xdndHandler used to wait for the stage to show up before calling
global.init_xdnd() . Since commit 65303d027aa8 xdndHandler is initalized
later so the stage might be already visible at this point causing the
show signal never to be emitted and thus global.init_xdnd will never
be called.
Fix that by checking by calling global.init_xdnd without waiting for
the stage's show signal to be emitted, as the stage is guaranted to be
visible at this point.
The key was removed from gsettings-desktop-schemas, GNOME should
always draw a background: the key existed to support xsetroot, but
we no longer read the _XROOTPMAP_ID.
Florian Müllner [Thu, 21 Feb 2013 22:11:22 +0000 (23:11 +0100)]
appDisplay: Apply the same padding to AllView and FrequentView
We add some horizontal padding to the AllView's content to make
sure content does not end up underneath the scrollbar; while this
is not required in case of the FrequentView which does not have
a scrollbar, applying the same padding ensures that both views
end up with the same spacing, which makes switching between them
less disruptive.
Florian Müllner [Thu, 21 Feb 2013 21:49:42 +0000 (22:49 +0100)]
appDisplay: Center AllView content
If the AllView is scrolled, the vertical scrollbar will take away
some horizontal space on one side, resulting in the content ending
up slightly off-center.
Account for this by using overlay-scrollbars instead.
Florian Müllner [Thu, 21 Feb 2013 21:30:09 +0000 (22:30 +0100)]
st-scroll-view: Add :overlay-scrollbars property
If enabled, scrollbars take away from the allocation given to the
view's content. This is usually preferrable to painting the bars on
top of the content, but there are exceptions, for instance when the
content needs to be centered with regard to the view as a whole.
Add a :overlay-scrollbars property to account for those cases.
Florian Müllner [Fri, 22 Feb 2013 03:29:57 +0000 (04:29 +0100)]
appDisplay: Remove scroll view hack in FrequentView
The frequent view should not be scrolled, but to work around the
icon grid overflowing, we used a (non-scrolling) scroll view anyway.
Now that IconGrid:fillParent allows us to avoid overflow, we can
remove this hack.
Florian Müllner [Thu, 21 Feb 2013 14:57:00 +0000 (15:57 +0100)]
overview: Keep open when a Control key is held
It is useful at times to perform several actions that would usually
close the overview (for instance launching an application) at once.
Currently we allow this by dragging items to a workspace rather than
just clicking it, but it's an odd metaphor with its own set of
problems.
Introduce an alternative approach (inspired by file selection in
file managers) by keeping the overview open if a Control key is
held down.
projects / gnome-shell.git / log